Table of Contents
Advertisement
6 | Connect the video equipment.
Connect VIDEO/AUX jack of this unit to the audio output
jack of the video equipment with an optional audio connecting
cord.
Connect the Television to the video equipment.
Refer to the Operating Instructions of the connected
equipment for details.
8 | Connect the AC cord to an AC outlet.
The DEMO will begin when the AC cord is plugged into an
AC outlet for the first time. To deactivate the DEMO, set the
clock.
* Do not leave objects generating magnetism, such as credit
cards, near the speakers, as these objects may be damaged.
¢ Do not bring the FM antenna near metal objects or curtain rails.
* Do not bring the MW/LW antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
* Do not unwind the MW/LW antenna wire.
To stand the MW/LW antenna on a surface
Fix the claw to the slot.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75 © terminals.
To connect other optional equipment — page 41.
REMOTE CONTROL
=
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
NS
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons @ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the
button while pressing SHIFT.
To use FUNCTION on the remote control
FUNCTION
substitutes for the function buttons (TAPE DECK
1/2, TUNER BAND, VIDEO/AUX, DVD/CD) on the main unit.
Each time FUNCTION is pressed, the next function is selected
cyclically.
»>/<> PRESET on the remote control
The function is the same as that of <4
on the main unit.
®
SHIFT
FUNCTION
>/<P>
PRESET
[NOTE |
¢ If the remote control is not going to be used for an extended
|
period of time, remove the batteries to prevent possible
electrolyte leakage.
* The remote control may not operate correctly when:
- The fine of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
Advertisement
Table of Contents
