Table of Contents
Advertisement
[5]Use the numbered buttons and <, > to enter a four-digit
password, and press ENTER.
Confirm your password.
Contiemation
of the Password)" e 0820
The Player is Locked
Remember
the Password
PASSWORD
1234
Press ENTER
button
Do not forget the password you set!
If you forget your password
Reset the unit to initial condition (see "To Reset DVD Setup',
page 53) and set all the settings again including the "Ratings"
setting.
[6] After confirming the password, press ENTER again.
Your entry is saved.
[7]Press SETUP to exit the setup menu.
Changing the settings
Once the ratings settings have been set, you first need to enter
the password to change them.
[1] Select "Ratings" in the "SETUP MENU" and press ENTER.
[2]Input your four-digit password and press ENTER.
[3]Select the setting to be changed and press ENTER.
Ratings).
:
Choose The Item AW
Fo "'Unlock' Player
2
Change Password
4
Change Level
Setting of the Country Code
ENTER : Choose item
RETURN : Previous menu
SETUP ; Completion
"Unlock Player' cancels the rating level, country and password
setting to default
[4]If you chose "Unlock player", the message "The player is
unlocked" appears on the display. Press ENTER.
For other settings, change to your desired setting and
press ENTER.
[5]Press d° SRETURN to return to the previous screen or
press SETUP to exit the setup menu.
48
Sets your preferred setting to turn the PBC (PlayBack Control)
function for video CDs on or off.
The default setting is "ON".
[1}Select "PBC" in the "SETUP MENU" and press ENTER.
[2]Select your desired setting, and press ENTER.
_
PEG
es
Choose The Item AW
PBC
2
PBC
ENTER : Choose item © RETURN : Previous menu
SETUP : Completion
3/Press SETUP to exit the setup menu.
Sets whether the disc resume memory is retained after power
off, opening of the disc tray, switching of the current disc or
switching of the function (ON) or not (OFF).
After these operations, playback starts either from the previous
stopped point (ON), or from the beginning of the disc (OFF).
Note that setting Disc Resume to OFF does not turn off the
resume playback feature itself. For the resume function, see
"Stopping and Pausing", page 17.
The default setting is "OFF".
[1]Select "Disc Resume" in the "SETUP MENU" and press
ENTER.
[2]Select your desired setting, and press ENTER.
Disc Resume:
Choose The Item AW
1.
Disc Resume
2
Disc Resume
ENTER : Choose item
RETURN : Previous menu
SETUP : Completion
[3]Press SETUP to exit the setup menu.
When the Disc Resume is ON
When a disc is loaded, the unit checks whether it holds the
resume memory data for the disc. If so, "RESUME?" is displayed
on the screen before the unit enters the stop mode.
In this condition, playback starts from the previous stopped point
by pressing <>.
To start play from the beginning temporarily during Disc
Resume ON
Press Ml in stop mode and then press <4» to start playback.
"RESUME OFF' is displayed in this case.
*The unit maintains the resume data of up to 5 DVDs and up to
a total of 10 audio CDs and video CDs.
*When the 6th DVD disc or the 11th audio CD or video CD is
inserted, the resume data for the oldest disc is overwritten by
the disc information of the new disc and deleted, even when
Disc Resume is set to OFF.
Advertisement
Table of Contents
