Samson 42-36 E Mounting And Operating Instructions page 8

Safety instructions and measures
even in the rare incident of an operating fault. As a result, they do not fall within the scope of
Directive 2014/34/EU.
Î For connection to the equipotential bonding system, observe the requirements specified in
Clause 6.4 of EN 60079-14 (VDE 0165-1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for
e.g. Type 2 N or 2 NI Strainer
e.g. Type 5827 Actuator (three-step version)
Type 5827 Actuator (version with positioner)
e.g.
e.g. Type 3374 Actuator (three-step version)
e.g. Type 3374 Actuator (version with positioner)
− Data sheets for
Accessories · Differential pressure and flow regulators
e.g.
Type 2 N or 2 NI Strainer
e.g.
− Mounting and operating instructions as well as data sheets for additional fittings
(e.g. shut-off valves, pressure gauges etc.).
1-4
u EB 1015
u EB 5827-1
u EB 5827-2
u EB 8331-3
u EB 8331-4
u T 3095
u T 1015
EB 3018 EN