Samson 42-36 E Mounting And Operating Instructions page 14

Safety instructions and measures
NOTICE
!
Risk of damage to the electric actuator due to incorrect operation of the manual over-
ride.
The actuator stem of the electric actuator can be adjusted manually.
Î Do not operate the manual override while the actuator is in operation. Only operate
the manual override of actuators without fail-safe action in the de-energized state.
Risk of damage to the electric actuator by moving the actuator stem too far.
The actuator stem of the electric actuator can be adjusted manually.
Î Only retract the actuator stem as far as the end position at the maximum.
Risk of damage to the electric actuator due to incorrect connection of the voltage.
The electric actuator has terminals to retract the stem (eL terminal) and to extend the
stem (aL terminal).
Î Do not apply a voltage to eL and aL at the same time.
Malfunction due to a configuration that does not meet the requirements of the appli-
cation.
The electric actuator is configured for the specific application by setting configuration
items and parameters.
Î Perform the configuration for the specific application during start-up and after a re-
set to default settings.
Note
SAMSON's After-sales Service can support you concerning lubricant, tightening torques
and tools approved by SAMSON.
1-10 EB 3018 EN