Samson 42-36 E Mounting And Operating Instructions page 11

WARNING
!
Risk of personal injury due to residual process medium in the regulator.
While working on the regulator, residual process medium can escape and, depending
on its properties, may lead to personal injury, e.g. (chemical) burns.
Î If possible, drain the process medium from all the plant sections affected and the
regulator.
Î Wear protective clothing, safety gloves and eye protection.
Damage to health relating to the REACH regulation.
If a SAMSON device contains a substance listed as a substance of very high concern
on the candidate list of the REACH regulation, this is indicated on the SAMSON deliv-
ery note.
Î Information on safe use of the part affected u www.samsongroup.com/en/
about-samson/material-compliance/reach-regulation/.
Crush hazard arising from moving parts.
The electric actuator contains moving parts (actuator and plug stems), which can injure
hands or fingers if inserted into the actuator.
Î Do not insert hands or finger into the yoke while the valve is in operation.
Î Disconnect the supply voltage and protect it against unintentional reconnection be-
fore performing any work on the control valve.
Î Do not impede the movement of the actuator or plug stem by inserting objects into
their path.
Î Before unblocking the actuator and plug stem after they have become blocked (e.g.
due to seizing up after remaining in the same position for a long time), release any
stored energy in the actuator (e.g. spring compression). See associated actuator
documentation.
Î Before starting any work on the regulator, depressurize plant sections as well as the
regulator.
EB 3018 EN
Safety instructions and measures
1-7