Advertisement
Tuner section
Symptom
Cause
Remedy
Radio stations cannot be received.
@ No antenna is connected.
@ The broadcast band is not set properly.
@ The frequency of the desired station is
not tuned.
@ Connect an antenna.
@ Set the broadcast band properly.
@ Tune the frequency of the desired station.
A station
which
was
preset
cannot
be
received by pressing the corresponding
@ The preset station belongs to a frequency
that cannot be received.
@ Preset
a
station
with
a
receivable
frequency.
numeric key.
@ The preset memory was cleared because
the power cord had been unplugged for a
long period of time.
@ Preset the station again.
Interference.
@ Noise
due
to
ignition
noise
of
an | @ Install the outdoor antenna apart from the
automobile.
road.
@ Noise due to an influence from an electric } @ Turn off the power of the appliance.
appliance.
@ Noise due to a nearby TV set.
@ Install the system more apart from the TV
set.
ne
Notes:
1. This system is microprocessor-contro!led, so malfunction may occur due to external noise or interference noise. In such a case, unplug the
power cord, plug it and turn power on again.
If the trouble still persists, unplug the power code and connect the power cord again while pressing the TUNER key of the
input selectors.
2. Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may
deform the plastic components.
"
Manufactured
under
license
from
Dolby
Laboratories
Licensing Corporation. Additionally licensed under one or
more
of the. following
patents:
U.S. numbers
3,632,885,
3,746,792 and 3,959,590; Canadian numbers
1,004,603 and
1,037,877.
"Dolby" and the double-D symbol
OO
are trademarks of
Dolby Laboratories Licensing Corporation.
For the U.S.A.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification is made.
KR-ve030 (en) 29
Advertisement
