Advertisement
Operation of remote control unit
In addition to the remote control of the receiver unit, the provided remote
control unit can control
a KENWOOD cassette tape deck, CD player, turnta-
ble, graphic equalizer, etc., connected
via the KENWOOD
system
control
cords.
Double cassette deck
Turn table
dLaca lh
e6o5
Saan
@ Loading batteries
f—
™~
1 Remove the cover.
Insert two AA-size (R6/SUM-
3) batteries
as
indicated by
the polarity marking.
=
1
CD player
E
5||
|e Soc
t=
a
a
@ Operation procedure
3 Close the cover.
2
Ly
Plug the power cord of the system into an AC wall outlet, and
press the
key on the remote control unit to turn the
power on.
When the power is turned on, press the key of the source com-
ponent to be operated.
@ When
two
operation
keys on the remote
control
unit are
pressed successively,
press each key securely reserving an
interval of more than 1 second for each press.
@ Be sure to read the instruction manuals of the components
connected via the system control cords.
L
30°
Operating range
Remote control light sensor
on the main system
Remote control unit
Notes:
1, The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets oter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In
such a case, change the systern installation position to prevent the malfunction.
12. xRr-vso30 (En)
Advertisement
