Advertisement
Operation with video components
For the connections and operations, also read care-
fully the instruction manuals supplied with the video
components to be connected.
When
connect to the KENWOOD
LD player having system
control terminal, do not connect anything to the system con-
trol terminal of the LD player.
LD player
=e
AUDIO OUT
esi
——
—————
==
~
Pe
Be] OOOO
Bo 8 ss)
Sr
| weo our
a
peers
2
as
VCR
~
VIDEO IN
8
se
-
=.
mee
tT
Tj
VIDEO OUT
[Ke]
[—— ==]
i
{
Launio iN
AUDIO OUT
VIDEO iN
Minitor TV
@ Playback of video tape
VIDEO 2 key
VIDEO 1 key
@ Recording of video source
c
1 Switch the power of the monitor TV ON.
a
.
1 Connect the video source component to be
recorded to the VIDEO 2 jacks.
@ A video player deck, video camera, LD player,DBS tuner, ete.,
can be connected.
2 Press the VIDEO 1 key.
—_
1 Lights up.
The display shows the
present audio input.
VIDEO 2
VIDEO 1
ial
@ When an input selector key other than VIDEO is pressed, the
audio input of the selected source will be played in place of
the audio input from VIDEO 1.
2 Press the VIDEO 2 key.
[ VIDEO 2 Lights up.
The display shows the
present audio input.
VIDEO 2 | video!
iat
@ When an input selector key other than VIDEO is pressed, the
audio input of the selected source will be played in place of
the audio input from VIDEO 2.
3 Play the VCR.
3 Play the video source component.
4 Adjust the volume.
\.
4 Put the VCR in the record mode.
22. KR-va020 tEn)
Advertisement
