Kenwood TS-140S Instruction Manual page 13

A. Display Panel
@ MODE display
@ M.CH display
@® SCAN display
@ VFO A/B display
@® SPLIT display
© * display
@ RIT display
RIT frequency
display
CW CWN
ORC)
: Indicates the selected mode.
: Turns ON during a Memory
Channel operation.
: Turns ON during scanning.
: Turns ON when VFO A (or
VFO B) operates.
: Turns ON during split opera-
tion.
: Lights during selection or
operation on memory chan-
nels 20 to 30. (See Sections
4-4 and 4-5 for additional in-
formation on this indicator.)
: Turns ON when using RIT.
: Shows the amount of RIT
offset to the nearest 100 Hz.
Note:
Minus ''—'' appears in the
display when the RIT offset
is below the transmit fre-
quency.
tsB usB M.CH SCAN AVFOB_ SPLIT
AM FM SEGARA baEE -4.4
RIT
®
® Frequency display: Indicates the operating fre-
quency. Frequency resolu-
tion is selectable between
10 and 100 Hz. Please refer
to Section 4-2-8 for addi-
tional information on the
selection process.
: The @ display indicates the
Memory Channel currently
display will be skipped dur-
ing Memory Channel scan.
(Please refer to Section
4-5-5.)
) e display
() Memory Channel
number display : Memory Channel Number is
displayed.
13