Table of Contents
Advertisement
cover has been fitted. Colour of the
replacement fuse cover must be the
same colour as that visible on the pin
face of the plug. Fuse covers are
available from any good electrical
store.
e
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings identifying the terminals
on your plug, proceed as follows:
e
Brown cable = L (Live)
e
Blue cable = N (Neutral)
e
Green/yellow cable must be
connected to ground B=
line.
With the alternative plugs a 13A
fuse must be fitted either in the
plug or adaptor or in the main fuse
box. If in doubt contact a qualified
electrician.
Green and yellow
or green
iL
Brown or red
N
Blue or black
UK_Plug
Plug the mains ead ii into the socket.
As
Risk of electric shock!
Before starting any work on the
electrical installation, please
disconnect the appliance from
the mains supply.
e
Position appliance up to the
kitchen wall.
e
Securely attach safety chain to the
wall behind the cooker.
e
To align the appliance with the
worktop, adjust the feet turning
right or left hand as required.
Final check
hk
. Check electrical functions.
. Turn on gas supply.
3. Check gas installations for secure
fitting and tightness.
4. Ignite burners and check
appearance of the flame.
The flames should be blue and
burn smoothly. If the flames
appear yellowish, check secure
position of the burner cap or
clean the burner. Switch off gas
and let burner cool before
touching it.
NO
Gas conversion
Zs
Risk of explosion!
Before starting any work on the
gas installation, please shut off
the gas supply.
In order to change your appliance's
gas type, change all injectors and
make flame adjustment for all valves at
reduced flow rate position.
e
Gas conversion must only be
carried out by a Gas Safe
registered installer or service
agent.
Exchange injector for the burners
1. Take off burner cap and burner
body.
2. Unscrew injectors.
3. Fit new injectors.
16 | EN
Advertisement
Table of Contents
