Table of Contents
Advertisement
As
Risk of explosion!
Before starting any work on the
gas installation, please shut off
the gas supply.
appliance are stated on the label
(or data plate)."
In the UK, Gas Safe registered
installers (Including the Regions of
British Gas) undertake to work to
safe and satisfactory standards.
Regulations
The cooker must be installed in
accordance with the Gas Safety
(Installation and Use) Regulations and
the relevant Building Regulations in
force.
Your appliance is adjusted for
Natural gas.
The cooker is designed for UK
installation using a flexible
connection with tubing in
accordance with the regulations in
force. Length of 900mm is
recommend.
Make sure that the natural gas
valve is readily accessible.
Service Representative will remove
the plug during connection and
connect your appliance by means
of a straight connection device
(coupling).
If a flexible hose is used it must not
come into contact with the top
150mm/6 inches (the hot region on the
diagram) of the rear of the appliance.
Do not pass the hose through the hot
region behind the oven.
"The adjustment conditions for this
Hot Region
If you need to use your appliance
later with a different type of gas,
you must consult an authorised
service centre for the related
conversion procedure.
Connecting the gas hose
Seal all connections with gas sealant.
ok
. Shut gas supply.
2. Connect cooker hose (5) to the inlet
valve of the oven.
3. Connect safety tube with valve with
right angled elbow 4.
14 | EN
Advertisement
Table of Contents
