Pump Motor - Hoshizaki KMD-201AWA Service Manual

7) Replace the panels in their correct positions.
8) Turn on the power supply.

11. PUMP MOTOR

1) Turn off the power supply.
2) Remove the panels and front insulation.
3) Disconnect the connector of the pump motor lead.
4) Remove the thumbscrew securing the pump motor.
5) Remove the hose band connecting the discharge hose.
6) Slide the pump motor at right slightly and lift it up towards you.
Hose Band
Discharge Hose
Screw
Fan Blade Cover
Screw
(Loosen)
48
Screw
(Remove)
Fan Motor Bracket
Thumbscrew
Pump Motor
Fan Motor