REC Quality
The quality of an audio recording can be set to Low (8,000Hz), Medium (16,000Hz), or High (32,000Hz),
but the higher you set the Recording Quality the greater the memory space required to save the resulting
WAV file.
1. In the SETTINGS Menu, press the "Volume Up"
/ "Back-Fast Rewind"
Forward"
"PLAY/PAUSE" button
2. Press the "Volume Up" button
Recording Quality settings: Low – Med – High. Press the "PLAY/PAUSE" button
REC Quality level and return to the SETTINGS Menu.
Record Sound
If not enough memory space is available, or the battery power is too low, the T.sonic
support the maximum recording capacity as outlined in the above table.
The closer you move the T.sonic
of the recording.
RADIO Recordings are recorded in Stereo. MIC Recordings are recorded in Mono. Line-In
Recordings are recorded in Stereo, or Mono depending on the Line-In device that is used.
to enter the REC QUALITY Mode.
, or "Volume Down" button
Sample rate
Low (8KHz)
1 (stereo/mono)
Med (16KHz)
1 (stereo/mono)
High (32KHz)
1 (stereo/mono)
™
820's Microphone to the source of the sound the higher the quality
/ "Volume Down"
buttons to select the REC Quality icon, then press the
Channels*
64/128 hrs
32/64 hrs
16/32 hrs
38
, or "Next-Fast
to switch between the 3
to select the
2GB
4GB
128/256 hrs
64/128 hrs
32/64 hrs
™
820 cannot