Record Using The Line-In Connection - Transcend Tsonic 820 4GB User Manual

Record using the Line-In connection

1. In the REC INPUT DEVICE Mode select Line-In as the recording device.
2. Plug the Line-In cable into the T.sonic
cable to a compatible source device e.g. CD Player.
3. Press and Hold the "RECORD" button
device using the T.sonic
4. A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in
the [/LINEIN.DIR/] folder.
5. Files Recorded using the Line-In are named in the order [Month/DayL001.WAV], then
[Month/DayL002.WAV] and so forth.
6. Pressing the "PLAY/PAUSE" button
"PLAY/PAUSE" button
7. Press the "RECORD" button
and the screen will return to the RECORD Mode.
8. Recorded files can be accessed in the RECORD Mode, or by using the File Navigator.
Record Sound
If not enough memory space is available, or the battery power is too low, the T.sonic
support the maximum recording capacity as outlined in the above table.
™ 820's Line-In port and connect the other end of the Line-In
™ 820's Line-In connection.
during a recording will Pause the recording, pressing the
again will resume the recording.
for more than 2 seconds during a recording to stop the recording
Sample rate
Low (8KHz)
Med (16KHz)
High (32KHz)
for more than 2 seconds to begin recording the source
Channels
2 (mono)
2 (mono)
2 (mono)
19
2GB 4GB
64 hrs 128 hrs
32 hrs 64 hrs
16 hrs 32 hrs
™ 820 cannot