Basic Operation; Charging The Battery; Power On - Transcend Tsonic 820 4GB User Manual

Before using the T.sonic
at least 12 hours by plugging it into a computer using the Mini USB to USB A-Type cable.

Charging the Battery

Plug the small end of the Mini USB to USB A-Type cable into the Mini USB connector on the T.sonic
and plug the large end of the cable into an available USB port on your desktop, or notebook computer.
™
The T.sonic 820's internal Li-ion battery will begin charging.

Power ON

Press and Hold the "POWER ON-OFF" button
will appear on the Color OLED Display. After the startup screen disappears the player will revert to the
default MUSIC Mode screen, you can now begin to use the T.sonic
It takes a few seconds to Power ON the unit.
When powering on the unit, if the LOCK icon
™ 820's "LOCK" switch is on. You must switch off the "LOCK" before you can Power ON the
T.sonic
™
T.sonic 820.

Basic Operation

™
820 for the first time you need to charge the internal battery for
Figure 2. Connecting to a Computer
to Power ON the T.sonic
appears on the OLED Display, this means that the
7
™ 820. An animated logo
™
820.
™
820