Record Using The External Microphone - Transcend Tsonic 820 4GB User Manual

Record using the External Microphone

1. In the REC INPUT DEVICE Mode select Ext MIC (External Microphone) as the recording device.
2. Plug an External Microphone into the T.sonic
3. Press and Hold the "RECORD" button
using the External Microphone.
4. A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in
the [/MICIN.DIR/] folder.
5. Files Recorded using an External Microphone are named in the order [Month/DayM001.WAV], then
[Month/DayM002.WAV] and so forth.
6. Pressing the "PLAY/PAUSE" button
"PLAY/PAUSE" button
7. Press the "RECORD" button
and the screen will return to the RECORD Mode.
8. Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator.
Record Sound
If not enough memory space is available, or the battery power is too low, the T.sonic
support the maximum recording capacity as outlined in the above table.
The closer you move the External Microphone to the source of the sound the higher the quality of
the recording.
during a recording will Pause the recording, pressing the
again will resume the recording.
for more than 2 seconds during a recording to stop the recording
Sample rate
Low (8KHz)
Med (16KHz)
High (32KHz)
™ 820's Line-In port.
for more than 2 seconds to begin an audio recording
Channels
1 (mono)
1 (mono)
1 (mono)
18
2GB
128 hrs 256 hrs
64 hrs 128 hrs
32 hrs 64 hrs
™
4GB
820 cannot