Pch Configuration - Asus MAXIMUS VII HERO Manual

3.6.2

PCH Configuration

PCI Express Configuration
This item allows you to configure the PCI Express slots.
PCI-E Speed [Auto]
This item allows your system to automatically select the PCI Express port speed. When
set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E
port runs at PCI-E 2.0 speed.
Configuration options: [Auto] [Gen1] [Gen2]
Intel Rapid Start Technology [Disabled]
This item allows you to enable or disable Intel
Configuration options: [Enabled] [Disabled]
The following items appear only when you set the Intel
[Enabled].
Entry on S3 RTC Wake [Enabled]
The system automatically wakes up and set to Rapid Start Technology S3 mode.
Configuration options: [Enabled] [Disabled]
Active Page Threshold Support [Enabled]
The system automatically goes into sleep mode when the partition size is not enough
for the Intel
Configuration options: [Enabled] [Disabled]
3-30
Entry After [0]
This item only appears when Entry on S3 RTC Wake is set to [Enabled].
This allows you to set the RTC wake-up timer at S3 entry. The time ranges
from 0 minute (immediately) to 120 minutes.
Rapid Start Technology to work.
®
Active Memory Threshold [0]
This item only appears when Active Page Threshold Support is set to
[Enabled]. This item supports Intel Rapid Storage Technology when the
partition size is greater than the Active Page Threshold size. When set to
zero (0), it will go to Auto mode and checks if the partition size is enough at
S3 entry.
Rapid Start Technology.
®
®
Rapid Start Technology to
Chapter 3: BIOS setup