Table of Contents
Advertisement
3.6
Platform Configuration menu
The IntelRCSetup menu items allow you to change the platform settings.
Take caution when changing the settings of the Platform Configuration menu items.
Incorrect field values can cause the system to malfunction.
3.6.1
PCH Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
PCH SATA Configuration
SATA Controller
Allows you to enable or disable the SATA Controller.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set SATA Controller to [Enabled].
Configure SATA as
Allows you to identify the SATA port connected to Solid State Drive or Hard Disk Drive.
Configuration options: [AHCI] [RAID]
Support Aggressive Link Power Management
Allows you to enable or disable the Support Aggressive Link Power (SALP)
Management.
Configuration options: [Disabled] [Enabled]
SATA Port 0-7
3.6.2
Miscellaneous Configuration
Active Video
Allows you to select the video type.
Configuration options: [Onboard Device] [Offboard Device]
3.6.3
Server ME Configuration
Displays the Server ME Technology parameters on your system.
3.6.4
Runtime Error Logging
Displays the Server ME Technology parameters on your system.
3-14
Port 0-7
Allows you to enable or disable the SATA port.
Configuration options: [Disabled] [Enabled]
Chapter 3: BIOS Setup
Advertisement
Table of Contents
