Remote Vehicle Start - Chevrolet Malibu 2024 Owner's Manual

Table of Contents

Advertisement

2. Separate the two halves of the remote
key using a flat tool inserted into the
bottom center of the remote key. Do not
use the key slot.
3. Remove the battery by pushing on the
battery and sliding it toward the bottom
of the remote key. Do not use a metal
object.
4. Insert the new battery, positive side
facing the back cover. Push the battery
down until it is held in place. Replace
with a CR2032 or equivalent battery.
5. Ensure that the silicone mat is correctly
positioned with no gaps or wrinkles.
6. Set remote key button side down on a
hard surface and press the other half
straight down to force the halves
together.
7. Reinsert the key.

Remote Vehicle Start

If equipped, this feature allows the engine
to be started from outside the vehicle.
: This button will be on the remote key
if the vehicle has remote start.
The climate control system will determine
the best mode and temperature setting for
operation during the remote start. Once the
vehicle is started with the Engine Start/Stop
button, the climate control system will
begin to operate at the last customer
selected operating mode and temperature.
Keys, Doors, and Windows
The rear window defogger may come on
during a remote start based on cold ambient
conditions. The rear defog indicator light
does not come on during a remote start.
If the vehicle has heated seats, they may
come on during a remote start. See Heated
and Ventilated Front Seats 0 33.
Laws in some local communities may restrict
the use of remote starters. For example,
some laws require a person using remote
start to have the vehicle in view. Check local
regulations for any requirements.
Other conditions can affect the performance
of the remote key. See Remote Key 0 7.
If your vehicle is low on fuel, do not use the
remote start feature. The vehicle may run
out of fuel.
Starting the Engine Using Remote Start
To start the engine using the remote start
feature:
1. Press and release
.
2. Immediately after completing Step 1,
press and hold
for at least
four seconds or until the turn signal
lamps flash. The turn signal lamps
flashing confirms the request to remote
start the vehicle has been received.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents