Remote Vehicle Start - Chevrolet Blazer 2022 Owner's Manual

Chevrolet Blazer Owner Manual (GMNA-Localizing-MidEast-16401983) -
2023 - CRC - 6/17/22
12 Keys, Doors, and Windows
3. Remove the battery by pushing on the
battery and sliding it toward the bottom
of the remote key. Do not use a metal
object.
4. Insert the new battery, positive side
facing the back cover. Push the battery
down until it is held in place. Replace
with a CR2032 or equivalent battery.
5. Ensure that the silicone mat is correctly
positioned with no gaps or wrinkles.
6. Set remote key button side down on a
hard surface and press the other half
straight down to force the halves
together.
7. Reinsert the key.

Remote Vehicle Start

If equipped, this feature allows the engine
to be started from outside of the vehicle.
: This button will be on the remote key
if the vehicle has remote start.
The climate control system will use the
previous settings during a remote start. The
rear defog may come on during a remote
start based on cold ambient conditions. The
rear fog indicator light does not come on
during a remote start.
If the vehicle has auto heated or ventilated
seats, they may come on during a remote
start. See Heated and Ventilated Front Seats
0 39.
If equipped with a remote start heated
steering wheel, it may come on during a
remote start when it is cold outside,
if enabled. See Heated Steering Wheel 0 83.
To view available settings for this feature,
touch the Settings icon on the infotainment
home page. Select Vehicle to display the
list of available options and select Comfort
and Convenience .
Laws in some local communities may restrict
the use of remote starters. For example,
some laws may require a person using
remote start to have the vehicle in view.
Check local regulations for any
requirements.
Do not use the remote start feature if the
vehicle is low on fuel. The vehicle could run
out of fuel.
Other conditions can affect the performance
of the remote key. See Remote Key 0 7.
Starting the Engine Using Remote Start
1. Press and release on the remote key.
2. Immediately press and hold
least four seconds or until the turn
signal lamps flash. The turn signal lamps
flashing confirms the request to remote
start the vehicle has been received.
During the remote start the doors will be
locked and the parking lamps will remain
on as long as the engine is running.
The engine will shut off after 15 minutes
unless a time extension is done or the
vehicle is started.
3. With the remote key in the vehicle,
press the brake pedal and start the
vehicle to drive.
for at