Turn And Lane-Change Signals; Interior Lighting; Instrument Panel Illumination; Control - Chevrolet Malibu 2024 Owner's Manual

104 Lighting
The hazard warning flashers turn on
automatically if the airbags deploy.

Turn and Lane-Change Signals

Move the lever all the way up or down to
signal a turn.
An arrow on the instrument cluster flashes
in the direction of the turn or lane change.
Raise or lower the lever until the arrow
starts to flash to signal a lane change. Hold
it there until the lane change is completed.
If the lever is briefly pressed and released,
the turn signal flashes three times.
The turn and lane-change signal can be
turned off manually by moving the lever
back to its original position.
If after signaling a turn or lane change, the
arrow flashes rapidly or does not come on, a
signal bulb may be burned out.
Replace any burned out bulbs. If a bulb is
not burned out, check the fuse. See Fuses
and Circuit Breakers 0 243.

Interior Lighting

Instrument Panel Illumination

Control

This feature adjusts the brightness of all
illuminated controls. The instrument panel
illumination control is next to the exterior
lamp control.
Push the knob in all the way until it extends
out and then turn the knob clockwise or
counterclockwise to brighten or dim the
lights. Push the knob back in when finished.
The knob is functional at night, or when the
headlamps or parking lamps are ON.

Courtesy Lamps

The courtesy lamps come on when any door
is opened unless the dome lamp override is
activated. To deactivate the dome lamp
override, press OFF and the indicator
light on the button will turn off.

Dome Lamps

Dome Lamp Controls