Chevrolet Malibu 2024 Owner's Manual page 270

4. Attach the air only hose (10) to the
sealant canister inlet valve (1) by turning
it clockwise until tight.
5. Slide the base of the tire sealant
canister (3) into the slot on the top of
the compressor (6) to hold it upright.
Make sure the tire valve stem is
positioned close to the ground so the
hose will reach it.
6. Remove the valve stem cap from the flat
tire by turning it counterclockwise.
7. Attach the sealant/air hose (2) to the tire
valve stem by turning it clockwise until
tight.
8. Plug the power plug (9) into the
accessory power outlet in the vehicle.
Unplug all items from other accessory
power outlets. See Power Outlets 0 75.
Vehicle Care
If the vehicle has an accessory power
outlet, do not use the cigarette lighter.
If the vehicle only has a cigarette lighter,
use the cigarette lighter.
Do not pinch the power plug cord in the
door or window.
9. Start the vehicle. The vehicle must be
running while using the air compressor.
10. Press the on/off button (5) to turn the
tire sealant and compressor kit on.
The compressor will inject sealant and air
into the tire.
The pressure gauge (8) will initially show
a high pressure while the compressor
pushes the sealant into the tire. Once
the sealant is completely dispersed into
the tire, the pressure will quickly drop
and start to rise again as the tire inflates
with air only.
11. Inflate the tire to the recommended
inflation pressure using the pressure
gauge (8). The recommended inflation
pressure can be found on the Tire and
Loading Information label. See Tire
Pressure 0 254.
269