Maps - Chevrolet Malibu 2024 Owner's Manual

Navigation Voice Control
Touch to access the voice control setting
display.
Navigation Volume To adjust the
volume level, touch the up and down
arrows. If the voice guidance prompt is
being heard, volume can also be adjusted
using the knob on the center stack or the
volume switch on the steering wheel.
Navigation Voice Prompt Level During a
Call. Options available are:
Full Prompt (Selected by default)
Tone Only
None
Traffic Events (If Equipped)
This feature provides a list of events that
are on the route or nearby. Touch
then select Traffic Events. A connected
Navigation service plan is required.
Traffic Preferences (If Equipped)
A
While in Map View, touch
and then Map and Navigation Settings to
access Traffic Preferences. When Show
Traffic on Map is turned on, the feature
provides an overview of the traffic flow
using different coded colors. The following
options are available for rerouting:
Auto Reroute to Better Route
system will automatically reroute if the
system detects there is a traffic issue
ahead.
Ask Before Rerouting (Default)
system detects there is a traffic issue
ahead, it will display a pop-up with
details about the issue. Choose to reroute
or cancel the alert.
Never Search for Better Route
system will not check for a better route
until one of the above options is selected.
Alert Preferences
Set alerts on or off during both inactive and
active guidance views. The following alerts
A
and
may be available:
Road Safety Alerts
upcoming School Zones.
Traffic Camera Alerts
, then Settings
Manage History
Touch Manage History to access the History
options:
Clear Recent Destinations
clear the recent destinations.
Clear Search History
the search history.
About
The
Touch to display software information,
such as:
Telenav Terms and Conditions
If the Telenav Privacy Statement
Navigation Version

Maps

The Navigation application requires a map
The
database to run. It is stored on an SD card
that is connected to the infotainment
system. If the map database is not available,
a missing SD card error message will be
displayed.
SD Card Error Messages
The SD card only works for one unique
Touch to display
vehicle. The SD card must pass
authentication verification to be used for
that specific vehicle. If the SD card has a
switch that can be set to read-only mode,
ensure that it is in the upward position and
not in read-only.
Touch to
Infotainment System
Touch to clear
123