Chevrolet Malibu 2024 Owner's Manual page 135

134 Infotainment System
understands that a phone call is requested
and will respond with questions until
enough details are gathered to make a call.
If a cell phone number has been saved with
a name and a place, the direct command
should include both, for example Call
<name> at work.
Using Voice Recognition for List Options
When a list is displayed, a voice prompt will
ask to confirm or select an option from
that list.
When a display contains a list, there may be
options that are available but not displayed.
The list on a voice recognition screen
functions the same as a list on other
displays. Scrolling or flinging can be used to
help display other entries from the list.
Manually scrolling or paging the list on a
display during a voice recognition session
suspends the current voice recognition event
and plays the prompt Please select
manually or touch the Back icon on the
infotainment display to try again.
If manual selection takes more than
15 seconds, the session terminates and
prompts that it has timed out. The display
returns to the display where voice
recognition was initiated.
The Back Command
Say Back or touch the Back icon on the
infotainment display to go to the
previous menu.
If in voice recognition, and Back is spoken
all the way back to the starting display, and
then Back is spoken one more time, the
voice recognition session will cancel.
Help
Say Help on any voice recognition display
and the help prompt for the display is
played.
Voice Recognition for the Radio
If browsing the audio sources when voice is
touched, the voice recognition commands
for AM, FM, and SiriusXM (if equipped) are
available.
Switch to AM : Switch bands to AM and
tune to the last AM radio station.
Switch to FM : Switch bands to FM and
tune to the last FM radio station.
Switch to SXM : Switch bands to SiriusXM
and tune to the last SiriusXM channel.
Tune to <AM frequency> AM : Tune to
the radio station whose frequency is
identified in the command (like nine fifty ).
Tune to <FM frequency> FM : Tune to the
radio station whose frequency is identified
in the command (like one oh one
point one ).
Tune to <AM frequency> AM HD : Tune
to the HD Radio station (if equipped) whose
frequency is identified in the command.
Tune to <FM frequency> FM HD : Tune to
the HD Radio station (if equipped) whose
frequency is identified in the command.
Tune to <FM frequency> FM HD <HD
channel number> : Tune to the HD Radio
station (if equipped) whose frequency and
HD channel are identified in the command.
Tune to SXM <SXM channel number> :
Tune to the SiriusXM radio station whose
channel number is identified in the
command.
Tune to SXM <SXM channel name> : Tune
to the SiriusXM radio station whose channel
name is identified in the command.