About This User Manual
Flame Explorer Software Tool Revision
Flame Explorer Software Tool Revision
When this manual is last reviewed, the current revision of the Flame Explorer
software tool will be 7.0.0.
Flame Explorer 7.0.0 is used for SF910i, and is compatible with SF810INT Flame
Scanner series firmware version ≥ C3.004.
Connecting Flame Explorer to SF910i devices loaded with lower firmware release
index might results in mismatching data displayed.
Operating Temperatures
The operating temperature range of the SF910i is reported in
printed on the product label.
For units with ATEX/IECEx certification, the ATEX/IECEx label might report another
temperature range, and this is not the temperature range of the whole product. It is
the temperature range for which the Ex certification of the enclosure is valid.
Safety Summary
Equipment Environment
All components, whether in transportation, operation, or storage must be in a
non-corrosive and static-electricity-safe environment.
Warning potential electronstatic charging hazard - Hazard can only be cleaned with
a damp cloth.
Electrical Shock Hazard during Maintenance
Disconnect power or take precautions to ensure that contact with energized parts
are avoided when servicing. SF910i is powered at a safe voltage (24V
no dangerous internal voltages but the electrical connections of the relay terminal
(J1) can be connected up to 50V
can cause injury or death.
8VZZ005286 B
and, if exposed, present a shock hazard that
AC
Appendix A
and is
) and has
DC
15