Table of Contents
Advertisement
About This User Manual
Warning, Caution, Information, and Tip Icons
Warning, Caution, Information, and Tip Icons
This User Manual includes Warning, Caution, and Information where appropriate to
point out safety related or other important information. It also includes Tip to point out
useful hints to the reader. The different icon types found in this document are presented
below:
Electrical warning icon indicates the presence of a hazard that could result in
electrical shock.
Warning potential electronstatic charging hazard - Hazard can only be cleaned with
a damp cloth.
Warning icon indicates the presence of a hazard that could result in personal injury.
Caution icon indicates an important information or warning related to the concept
discussed in the text. It might indicate the presence of a hazard that could result in
corruption of software or damage to equipment/property.
Information icon alerts the reader to pertinent facts and conditions.
Tip icon indicates advice on, for example, how to design the project or how to use
a certain function.
Although Warning hazards are related to personal injury, and Caution hazards are
associated with equipment or property damage, it must be understood that operation of
damaged equipment could, under certain operational conditions, result in degraded
process performance leading to personal injury or death. Therefore, fully comply with all
Warning and Caution notices.
SF910i Firmware Revisions
When this manual is reviewed, the current firmware revision of the SF910i will be
B03.
If SF910i is already installed and it is working properly, the user may not need to update
to newer versions. In this case, continue to refer to the previous version of this manual
to operate and configure Flame Scanner.
For any doubt or question, contact the local ABB dealer to get the right suggestion or
write to the tech support hot-line (see
8VZZ005286 B
Technical
Support).
14
Advertisement
Table of Contents
Troubleshooting
