Troubleshooting - Beko BT383S User Manual

After the cleaning process is completed,
place the air deflector cover to its place,
close the latches by moving them and
close the kickplate.
NOTE: You can clean by hand, provided
you wear protective gloves. Do not try to
clean with bare hands. The condenser fins
may damage your hands. Cleaning from
left to right may damage the condenser
fins. This may lead to drying issues.

11 Troubleshooting

Drying operation takes too long.
• Fiber filter (interior and exterior filters)
pores may be clogged. >>> Wash the
fiber filters with warm water and dry.
When the air deflector cover is re-
moved, it is normal to have water at
the plastic section in front of the
condenser.
If you see fiber accumulation on the fan
cover and the kickplate, remove it with a
cloth.
Do not put weight on the kickplate when it
is open.
Do not use abrasive materials or
steel wool to clean the drum.
• Front side of the condenser may be
clogged. >>> Clean the front side of the
condenser.
• The ventilation grills in front of the ma-
chine may be closed. >>> Remove any
object in front of the ventilation grills that
blocks ventilation.
EN / 65
IT
EN