Adjusting The Legs; Moving The Drying Machine; Warnings Regarding The Noise; Replacing The Lighting Bulb - Beko BT383S User Manual

Fix the water discharge hose at a
maximum height of 80 cm.
Ensure that the water discharge
hose does not get kinked, collapsed
or pressed on between the dis-
charge and the drying machine.
Hose connection should be made
in such a way that it won't come
out of its location. Leaked water
may cause damage.
Do not extend the water drainage
hose.
Check whether the water flows at
an adequate rate or not. The drain-
age line should not be closed or
clogged.
If an accessory package is provided
with your product, check the de-
tailed instructions.

7.4 Adjusting the Legs

Until the drying machine stands level and
sturdy, adjust the legs by turning them left
and right.

7.5 Moving the Drying Machine

• Drain the water in the drying machine
completely.
• If the product is connected via direct dis-
charge, remove the hose connections.
The drying machine is recommen-
ded to be moved in upright posi-
tion. If it cannot be moved in up-
right position, transport via tilting to
the right side when viewed from the
front. Wait for 12 hours prior to op-
erating the drying machine.

7.6 Warnings Regarding the Noise

While the product is being operated, it is
normal for a metallic noise to come from
the compressor from time to time.
The water that accumulates while the
product is being operated, is pumped to the
water tank via the pump. It is normal to
hear pumping sounds from the product dur-
ing this operation.

7.7 Replacing the Lighting Bulb

If your drying machine has drum lighting
lamp;
Consult the authorized service to replace
the bulb/LED used in lighting your drying
machine. The bulb in this product is not
suitable for home lighting. The intended
use of this lamp is to ensure safely loading
the laundry to the drying machine. The
EN / 52