Warning Indicators; Starting The Program; Child Lock - Beko BT383S User Manual

Changing the End Time
If you want to change the duration during
the countdown:
1. Cancel the program by turning On / Off /
Program selection button after pressing
the Start / Standby selection button.
2. Select the desired program and repeat
the End Time selection process.
Cancelling the End Time Function
If you want to cancel the end time count-
down and start the program immediately:
1. Cancel the program by turning On / Off /
Program selection button after pressing
the Start / Standby selection button.
2. Select the desired program and press
the Start / Standby button.
When you activate the end time
function in your dryer, your machine
rotates periodically to prevent
wrinkles and the odour of moisture.
Only the engine power supply will
be activated during the wrinkle pre-
vention phase. In addition, if you do
not open the lid of your machine or
make any interventions, the anti-
wrinkle function will be activated
after the program is finished.
Drum Light
You can turn on and off the drum light by
pressing this button. The light turns on
when the button is pressed and turns off
after a certain time.

9.6 Warning Indicators

Warning indicators may vary de-
pending on the model of your dry-
ing machine.
Filter cleaning
When the program is completed, the warn-
ing indicator for filter cleaning turns on.
Water tank
If the water tank fills up while the program
is continuing, the warning indicator starts
flashing and the machine goes to standby.
In this case, empty the water tank and start
the program by pressing the Start / Standby
button. Warning indicator turns off and pro-
gram resumes.
Cleaning of filter drawer/heat exchanger
Warning symbol flashes periodically to re-
mind that filter drawer must be cleaned.

9.7 Starting the Program

Press the Start/Standby button to start the
program.
Start/Standby and Drying indicators turn on
to show that program has started.

9.8 Child Lock

The drying machine has a child lock which
prevents the program flow from being af-
fected when the buttons are pressed during
a program. When the Child Lock is activ-
ated, all buttons on the panel except the
On/Off program selection button are deac-
tivated.
1. Press the Audible Warning button for 3
seconds in order to activate the child
lock.
2. When the Child Lock is activated, the
child lock warning indicator on the
screen turns on.
When the child lock is active;
When the drying machine operates or is in
standby state the indicator symbols will not
change upon changing the position of the
program selection button.
1. The child lock has to be deactivated to
be able to start a new program after the
current program is finished or to be able
to interfere with the current program.
2. To deactivate the child lock, keep the
same button pressed for 3 seconds
again.
EN / 58