Maintenance And Cleaning; Fiber Filters - Beko BT383S User Manual

10 Maintenance and Cleaning

Read the "Safety Instructions" first!
If it is cleaned regularly, the life of the
product will be extended and common
problems will be reduced.
10.1 Fiber Filters (internal and ex-
ternal filters) / Cleaning of the
Interior Surface of the Loading
Door
The hair and fibers that are separated from
the laundry during drying process is collec-
ted by the Fiber Filter.
After each drying cycle, clean the fiber filter
and the inner surface of the loading door.
NOTE: Your drying machine has 2 fiber fil-
ters with one placed inside the other. Do
not operate the product without the fiber fil-
ters.
To clean the fiber filters:
1. Open the loading door.
2. Hold the first part (inner filter) of the two
part fiber filter and remove it by pulling it
upwards.
3. Remove the second part (outer filter) by
pulling it upwards.
Ensure that hair, fiber and cotton
balls do not fall into the open slot
where the filters are installed.
4. Open both of the fiber filters (outer and
inner filters) and remove the fibers with
your hands or with the brush on the air
deflector. You can also clean the hair in
the filters with a vacuum cleaner.
5. Clean both filters under running water in
reverse direction of fiber accumulation
with your hand or with a soft brush. Dry
the filters before placing them back.
EN / 61
IT
EN