Table of Contents
Advertisement
10.
If it is necessary to remove or replace the IR camera, disconnect the cable from the right (1) and left (2)
sides of the camera, and then peel the camera module up to remove it from the adhesive that secures it
to the enclosure (3) .
The HD + IR camera is available as spare part number L81890-001.
NOTE:
subcomponents.
11.
If it is necessary to remove the camera privacy cover, lift the cover straight up and off the display.
The camera privacy cover is available as spare part number L77237-001.
12.
If it is necessary to remove the hinges from the display enclosure, remove the two Phillips broadhead
M2.5 × 2.5 screws (1) and the Phillips M2.0 × 4.0 screw (2) from the bottom of each hinge.
62
Chapter 5 Removal and replacement procedures for authorized service provider parts
You must remove the display assembly from the computer to remove the remaining display
Advertisement
Table of Contents
