Table of Contents
Advertisement
Touchpad assembly
Table 5-11
Touchpad assembly description and part number
Description
Touchpad assembly (includes cable)
Before removing the touchpad assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
4.
Remove the battery
Remove the touchpad assembly:
1.
Disconnect the cable from the ZIF connector on the touchpad (1).
2.
Lift the silver tape from the two locations that secure touchpad to the computer (2).
3.
Remove the six broadhead Phillips M2.0 × 2.0 screws (3) that secure the touchpad to the computer.
4.
Lift the touchpad from the computer (4).
Reverse this procedure to install the touchpad assembly.
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
33).
31).
32).
Component replacement procedures
Spare part number
L77252-001
31).
45
Advertisement
Table of Contents
