Configuring the Summer Time Setting
●
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to configure the summer
time setting.
Note
When "Auto" is selected for
●
standard/summer time switching,
the watch will switch between
standard time and summer time
automatically. You do not need to
change the time setting manually for
changes between summer time and
standard time. Even if you are in an
area that does not observe summer
time, you can leave the watch's
summertime setting as "Auto".
Changing the time setting manually
●
with a watch operation will cancel
auto standard time/summer time
switching.
A CASIO WATCH+ screen shows
●
information about summer time
periods.
Operation Guide 5560
Swapping Your World Time and Home
●
Time
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Before swapping
Home Time
World Time
Note
Auto time adjustment is not
●
performed for 24 hours after
swapping of the Home Time and
World Time.
Viewing Stopwatch Data
This section explains how to send lap times
and split times (up to 100 records) stored in
watch memory, and other data to your phone
for viewing with CASIO WATCH+.
Sending Stopwatch Data to a Phone
●
Use the procedure below to send data from
the watch to a phone.
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
After swapping
World Time
3.
Y Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
Home Time
phone display.
Tapping a stopwatch data item displays
●
its details.
Checking a Lap Time
●
Use CASIO WATCH+ to check the data you
sent to the phone.
1.
Y Tap the "CASIO WATCH+" icon.
2.
Y Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
Tapping "Edit" displays a screen that
●
you can use to change the data item
title and to delete lap time data.
7