Viewing Stopwatch Data; Configuring Timer Settings; Setting The Alarm - Casio 5686 Operation Manual

Displaying an Scheduled Event
●
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
Press (D).
This causes the display to change from
●
the current time to an event.
Each press of (B) switches between the
information as described below.
Current ongoing Next scheduled
scheduled event end time event start time
The mode hand indicates the time
●
remaining until the currently ongoing
event is complete. The mode hand
points to [OVER] when the remaining
time exceeds 120 minutes.
If you do not have scheduled events
which will finish within 24 hours, the
mode hand points to [00].
Mode hand
When a scheduled start time or end time
●
is reached, the watch will beep and
display an indication for one or two
seconds.
You can enable or disable the beep
sound as required.
Enabling or Disabling the Schedule
l
Timer Notification Sound
When the remaining time of the
●
currently ongoing scheduled event is 10
minutes or less, the watch display
shows the remaining time, and counts it
down in one-second units.
Watch Operation Guide 5686

Viewing Stopwatch Data

This section explains how to send lap times
(up to 200 records) from watch memory to
your phone, and view it on your phone for with
CASIO WATCHES.
Sending Stopwatch Data to a Phone
●
Use the procedure below to send data from
the watch to a phone.
While the watch is connected with your
●
phone, lap times being recorded by the
watch are periodically transferred to the
phone automatically.
Check the connection
Make sure that the
●
the watch display when you perform the
procedure below. If
refer to the information at the link below.
Connecting with a Phone
l
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
Tapping a stopwatch data item displays
●
its details.
Checking a Lap Time
●
Use CASIO WATCHES to check the data you
sent to the phone.
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
Tapping "Edit" displays a screen that
●
you can use to change the data item
title and to delete lap time data.
1. Y
2. Y
symbol is shown on
e
is not displayed,
e
1. Y
2. Y

Configuring Timer Settings

Check the connection
Make sure that the symbol is shown on
e
●
the watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone
l
Tap the "CASIO WATCHES" icon.
Perform the operation shown on the
phone screen to configure the timer time
setting.

Setting the Alarm

Check the connection
Make sure that the symbol is shown on
e
●
the watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone
l
Tap the "CASIO WATCHES" icon.
Perform the operation shown on the
phone screen to configure alarm time
settings.
11