Timer; Setting The Time; Using The Timer; Configuring Alarm Settings - Casio Edifice EQB-900DB-2AER Operation Manual

Timer

The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted in the cases described
●
below.
When battery power is low
—
Getting ready
Enter the Timer Mode.
Navigating Between Modes
l
Timer Mode

Setting the Time

1. Pull out the crown to the first click.
2.
Rotate the crown to change the
countdown start time setting.
The countdown start time can be set in
●
1-minute units up to 24 hours.
24-hour
Seconds
Hours Minutes
3. Push the crown back in.
Note
You can set a countdown start time
●
of 24 hours by aligning the small 24-
hour hand with 24.
Operation Guide 5560

Using the Timer

1.
Press (B) to start the countdown.
A beeper will sound for 10 seconds to let
you know when the end of a countdown is
reached.
To pause an ongoing countdown, press
●
(B). To reset a paused countdown to the
start time, press (D).
2.
Press any button to stop the tone.
3.
Press (A) twice to return to the
Timekeeping Mode.
The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
●
below.
When battery power is low
—
When watch is at Level 2 power saving
—
Power Saving
l
Getting ready
Crown
Enter the Alarm Mode.
Navigating Between Modes
l
Alarm
Alarm Mode

Configuring Alarm Settings

1.
Pull out the crown to the first click.
This turns on the alarm.
Alarm on
Hours 24-hour
Minutes
2.
Rotate the crown to change the alarm time
setting.
3.
Push the crown back in.
4.
Press (A) once to return to the Calendar
Mode.
Note
A beeper will sound for 10 seconds
●
to let you know when the alarm time
is reached.

Turning the Alarm On or Off

Press (D) to toggle the alarm between on and
off.
Alarm on

Stopping the Alarm

While the alarm is sounding, press any button
to stop it.
Crown
Alarm off
13