Viewing Stopwatch Data; Configuring World Time Settings - Casio 5658 Operation Manual

Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Move the phone close to (within one meter
of) the watch.
3. X
Press (D).
[TIME] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
Trying to connect
Note
The connection is terminated
●
automatically after time adjustment is
complete.
If time adjustment fails for some
●
reason, [ERR] will appear.
[RCVD] flashes when the receive
●
operation starts, and [RCVD] appears
after it is complete.
Watch Operation Guide 5658

Viewing Stopwatch Data

This section explains how to send lap times
(up to 200 records) that are stored in watch
memory, as well as other data to your phone
for viewing with EDIFICE Connected.
Sending Stopwatch Data to a Phone
●
Use the procedure below to send data from
the watch to a phone.
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
.
e
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
If connection fails for some reason,
●
After time
[ERR] will appear on the display
adjustment
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
Tapping a stopwatch data item displays
●
its details.
Checking Sent Data
●
Use EDIFICE Connected to check the data
you sent to the phone.
1. Y
Tap the "EDIFICE Connected" icon.
2. Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
Tapping "Edit" displays a screen that
●
you can use to change the data item
title and to delete data.
Configuring World Time
Settings
Specifying a World Time City with EDIFICE
Connected causes the watch's World Time
City to change accordingly. Settings can be
configured to perform auto summer time
switching for the World Time City.
Note
EDIFICE Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
You can use EDIFICE Connected to
Connected
●
configure settings for user cities that
are not included in the watch's built-in
World Time Cities. You must use
EDIFICE Connected to select a user
city as your World Time City.
Selecting a World Time City
●
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
.
e
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
Connected
11