Table of Contents
Advertisement
Other :
Power saving, battery level indicator, LED
light (Super Illuminator, afterglow)
Power Supply :
Solar panel and one rechargeable battery
Approximate Battery Life :
Approximately 5 months
Conditions
Auto Time Adjustment: 4 times/day
Alarm: Once (10 seconds)/day
Illumination: Once (1.5 seconds)/day
Power Saving: 6 hours/day
Mobile Link Precautions
Legal Precautions
●
This watch complies with or has received
●
approval under the radio laws of various
countries and geographical areas. Using
this watch in an area where it does not
comply with or has not received approval
under applicable radio laws may be a
criminal offense. For details, visit the CASIO
Website.
http://world.casio.com/ce/BLE/
Use of this watch inside of aircraft is
●
restricted under the aviation laws of each
country. Be sure to follow the instructions of
airline personnel.
Precautions when using Mobile Link
●
When using this watch in combination with
●
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure of a building, and other factors may
require a much closer range.
This watch can be affected by other devices
●
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can be
affected by operation of a microwave oven.
The watch may not be able to communicate
normally with a phone if a microwave oven
is operating nearby. Conversely, this watch
may cause noise in radio reception and the
video image of a TV.
Bluetooth of this watch uses the same
●
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference, slower communication speeds
and noise for the watch and the wireless
LAN device, or even communication failure.
Operation Guide 5560
Stopping Radio Wave Emission by This
●
Watch
The watch is emitting radio waves whenever
the second hand is pointing to e (Bluetooth
connected) or [R] (Bluetooth connection
standby).
Even if the second hand is not pointing at e or
[R], the watch will automatically attempt to
connect with a phone four times a day to adjust
its time settings.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operations below to stop
radio wave generation.
Stopping Radio Wave Generation
●
Press any button to terminate the Bluetooth
connection.
Connected
Disabling Auto Time Adjustment
●
Configure CASIO WATCH+ settings to
disable synchronization between the watch
and phone.
Using CASIO WATCH+ to Configure
l
Settings
Copyrights and Registered
Copyrights
The Bluetooth
®
word mark and logos are
●
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
iPhone and App Store are registered
●
trademarks of Apple Inc. in the United
States and other countries.
iOS is a trademark or registered trademark
●
of Cisco Systems, Inc.
GALAXY, GALAXY Note, and GALAXY S
●
are registered trademarks of Samsung
Electronics Co., Ltd.
Android and Google Play
●
trademarks of Google Inc.
Other company names and product names
●
used herein are trademarks or registered
trademarks of their respective companies.
I can't pair the watch with a
phone.
Q1
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
http://world.casio.com/os_mobile/wat/
After disconnection
Is CASIO WATCH+ installed on your
phone?
The CASIO WATCH+ needs to be
installed in order to connect with the
watch.
l
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
Android Users
Is a stopwatch or timer operation being
performed?
The watch cannot pair with a phone while
a stopwatch time measurement operation
is in progress. Stop the measurement
operation and then pair with a phone.
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCH+. For
details about setting procedures, see your
TM
are registered
phone documentation.
On the Home Screen, tap: "Menu" n
"Settings" n "Bluetooth" n "Menu" n "BT
Smart settings" n "Disable".
Troubleshooting
I've never been able to establish a
(pairing) connection between the
watch and phone.
A Install the required app on your
phone.
"Settings"n"Bluetooth"n On
●
Enable Bluetooth.
●
16
Advertisement
Table of Contents
