Table of Contents
Advertisement
Setting Up the Display
Mounting the Display
You can install the display on a vertical surface with a suitable wall mounting bracket or on a
horizontal surface with the optional desktop stands. Please pay attention to the following
notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the display
to fall or malfunction.
VESA mounts are used to secure the PS-Series for display. The PS-Series displays can be
installed using a variety of VESA mounts available through Planar. If you do not have a VESA
mount and would like to purchase one, contact Planar.
If you purchased a VESA mount, you should have received a separate box with mounting
supplies and an installation manual. Follow these instructions carefully.
Keep in mind the following general installation guidelines:
• Screw length is crucial and will vary depending on the type of mount you use. Total screw
length will include the penetration length plus the length required by the type of VESA
mount in use.
Caution: Shorter screws will result in insufficient mounting length and longer screws could
puncture parts inside the display.
• Prior to installation, make sure you know where all of the mounting points are located.
• Follow all safety precautions outlined in the VESA Installation manual.
• Verify the parts received with the list shown in the VESA Installation manual.
Notes:
• To maintain proper ventilation, keep
at least 10mm of clear space from
wall to rear cover of the display.
• The power connector should be
positioned at the bottom of other
connectors when you rotate the
display.
• Please consult a professional
technician for wall mount
installations. The manufacturer
accepts no liability for installations
not performed by a professional
technician.
Setting Up the Display
10mm
(0.39")
9
Advertisement
Table of Contents
