Connecting The Ypbpr Component Video Input - Planar PS5551 User Manual

12 Setting Up the Display

Connecting the YPbPr Component Video Input

1. Connect the VIDEO IN (COMPONENT) jacks on the display to the component output jacks
on an A/V device (such as a VCR or DVD player) using a component video cable.
2. Connect the DVD player's audio output jacks to the AUDIO IN (AUDIO2 or AUDIO3) jacks
on the display using a suitable audio cable.
3. To view video image from this input, press the
Audio cable
*The cables are not supplied and should be purchased separately.
Note:
Connector locations on the control panel may differ depending on the model.
button on the remote control.
YPbPr
Component video cable
DVD player / VCR