Restarting The Computer; Restoring The Preinstalled Software From The Product Recovery Media - Toshiba Satellite Pro A120-106 User Manual

Getting Started

Restarting the computer

Certain conditions require that you reset the system. For example, if:
■
You change certain computer settings.
■
An error occurs and the computer does not respond to your keyboard
commands.
■
There are three ways to reset the computer system:
1. Click start then click Turn off computer. From the Turn off
2. Press Ctrl + Alt + Del to display the Windows Task Manager,
3. Press the power button and hold it down for five seconds. Wait 10 to
Restoring the preinstalled software from the Product
Recovery Media
If preinstalled files are damaged, use the Product Recovery Media to
restore them. To restore the operating system and all preinstalled software,
follow the steps below.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Recovery Media in the optional optical media drive and turn off
the computer's power.
2. Hold down the F12 key and turn on the power. When In Touch with
Tomorrow TOSHIBA appears, release the F12 key.
3. Use the cursor key to select the CD/DVD icon in the display menu. For
details, refer to the Boot Priority section in Chapter 7,
4. Follow the on-screen instructions.
5. If your computer came with additional software installed, this software
can not be recovered from the Product Recovery disk. Re-install these
applications (e.g. Works Suite, DVD Player, Games, etc.) separately
from other media.
Restoring TOSHIBA utilities and drivers
If Windows is working properly, individual drivers or applications can be
separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD)
contains drivers and applications, which are included with your computer
system. If your system drivers or applications have become damaged in
some way, you can reinstall most of the components from this folder.
Create a copy of this folder to an external media for more convenience.
3-10
computer menu select Restart.
then select Shut Down and Restart.
15 seconds, then turn the power on again by pressing the power
button.
HW Setup.
User's Manual