Removing A Memory Module - Toshiba Satellite P500-BT2G22 Resource Manual

34
Adding memory (optional)
14 Replace the memory module slot cover and secure it using the
screws.
15 Re-insert the main battery. For more information on inserting
the main battery, see "Inserting a charged battery" on page 49.
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.

Removing a memory module

If you need to remove a memory module:
1 Complete steps 1–8 in "Installing a memory module" on
page 30 to shut down the computer and open the memory
module slot cover.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
The following screen may appear when you turn on the power:
®
If "Start Windows
If one of the Safe Mode options is highlighted, it is best to press
Enter to go into Safe Mode, then shut down and restart the system, at
which time Windows
When Safe Mode is suggested, this could be a sign that you may
need to scan your internal storage drive for errors or defragment the
drive. If so, consult Windows
Normally" is highlighted, then press Enter.
®
should boot back up normally.
®
Help and Support.