Your Computer's Tft Display; Inserting An Expresscard - Toshiba Satellite P500-BT2G22 Resource Manual

2 Pull the latches away from the memory module.
The memory module pops up slightly.
3 Gently lift the memory module to a 30-degree angle and slide it
out of the slot.
4 Replace the memory module slot cover and secure it using the
screws.
5 Re-insert the main battery. For more information on inserting
the main battery, see "Inserting a charged battery" on page 49.
6 Turn the computer right side up.
7 Reconnect the cables.
8 Restart the computer.

Your computer's TFT display

Small bright dots may appear on your screen display when you turn
on your computer. Your display contains an extremely large number
of thin-film transistors (TFT) and is manufactured using high-
precision technology. Any small bright dots that may appear on
your display are an intrinsic characteristic of the TFT
manufacturing technology. Over a period of time, and depending on
the usage of the computer, the brightness of the screen will
deteriorate. This is also an intrinsic characteristic of the screen
technology. When the computer is operated on battery power, the
screen will dim and you may not be able to increase the brightness
of the screen while on battery power.

Inserting an ExpressCard

Before you insert an ExpressCard
comes with the card to see if you need to do anything before you
insert it.
To insert an ExpressCard:
1 Locate the ExpressCard slot on the side of the computer.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
®
You may first need to remove the card slot protector before you can
insert a card.
Your computer's TFT display
®
, refer to the documentation that
35