Setting Battery Notifications - Toshiba Satellite P500-BT2G22 Resource Manual

Flashes amber when the main battery charge is low and it is
time to recharge the main battery or plug in the AC adaptor

Setting battery notifications

Your computer can be configured to warn you when the battery is
running low. For more information, see "Setting battery
notifications" in the electronic user's guide.
Changing the main battery
When your main battery has run out of power, you have two
options: plug in the AC adaptor or install a charged main battery.
Battery life and charge time may vary, depending upon power
management settings, applications and features used.
HINT: Be careful not to confuse the battery light
( )
light , and the power button light (near the upper left corner of
the keyboard).
When the ON/OFF light or power button light flashes amber, it
indicates that the system is suspended (using the Windows
operating system Sleep command).
TECHNICAL NOTE: The recharging of the battery cannot occur when
your computer is using all of the power provided by the AC adaptor
to run applications, features, and devices. Your computer's Power
Options utility can be used to select a power level setting that
reduces the power required for system operation and will allow the
battery to recharge.
Never short circuit the battery pack by either accidentally or
intentionally bringing the battery terminals in contact with another
conductive object. This could cause serious injury or fire, and could
also damage the battery pack and computer.
Never expose a battery pack to abnormal shock, vibration or
pressure. The battery pack's internal protective device could
fail, causing it to overheat or ignite, resulting in caustic liquid
leakage, or explosion or fire, possibly resulting in death or
serious injury.
TECHNICAL NOTE: To avoid losing any data, save your files and
then either completely shut down your computer or put it into
Hibernation mode before changing the main battery.
Mobile computing
( )
, the ON/OFF
47
®