Preparation - Toto WASHLET SW308301 Instruction Manual

Preparation

1. Insert the battery
1
Remove the remote control
from the hanger.
2
Open the battery cover and
insert two AA batteries.
Close
Open
• When batteries are properly loaded, all
the LEDs on the remote controll light up
for about 2 sec.
3
Mount the remote control in the
hanger.
■ About the batteries
• Use dry cell, alkaline batteries.
• Be sure to follow "Safety Precautions" to
prevent the batteries from rupturing or leaking
fluid. (Pages 6, 8)
14
Remote control
Hanger
Battery cover
Using the Product for the First Time
If the remote control is secured
(for anti theft)
1
Remove the screw from the
remote control fixture.
2
Remove the remote control
from the hanger.
■ To secure the remote control again
Tighten and fix the screw.
(Overtightening may cause damage to parts
such as the hanger.)
(View from side)
Remote control
Hanger
Screw
Remove
Phillips screwdriver
Wall