Preparation
1.Insert the battery
1
Remove the remote control
from the hanger.
2
Open the battery cover and
insert two AA batteries.
Close
Open
●When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
● The display goes out when no button on the
remote control is pressed for 5 minute or more.
3
Mount the remote control in
the hanger.
■ About the batteries
● Use dry cell, alkaline batteries. Follow the instructions
below to prevent the batteries from rupturing or
leaking fl uid.
When replacing the batteries, use new batteries of
the same brand.
If you will not be using the remote control for a long
time, remove the batteries.
Do not use rechargeable batteries.
14
Using the Product for the First Time
Remote control
Hanger
Battery cover
If the remote control is secured
(for anti theft)
1
Remove the screw from the
remote control fi xture.
Wall
2
Remove the remote control
from the hanger.
■ To secure the remote control again
Tighten the screw.
(Overtightening may cause damage to parts
such as the hanger)
(View from side)
Remote control
Hanger
Screw
Phillips screwdriver