Preparation
1.Insert the battery
1
Remove the remote control
from the hanger.
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery cover
●When batteries are properly inserted,
■
temperature levels appear on the display of
the remote control (back side).
●The display goes out when no button on the
■
remote control is pressed for 1 minute or
more.
WATER TEMP
SEAT TEMP
DRYER TEMP
3
Mount the remote control in
the hanger.
■ ■ About the batteries
■ ● Use dry cell, alkaline batteries. Follow the instructions
below to prevent the batteries from rupturing or
leaking fl uid.
■ • When replacing the batteries, use new batteries of
the same brand.
■ • If you will not be using the remote control for a long
time, remove the batteries.
■ • Do not use rechargeable batteries.
14
Using the Product for the First Time
Remote control
Close
Open
If the remote control is secured
(for anti theft)
1
Remove the screws (2, left
and right) from the remote
control fi xture.
Remote
control
Phillips
screwdriver
(Fine-tip type)
Remove
2
Remove the remote control
from the hanger.
Remote
control
■ ■ To secure the remote control again
Tighten and fi x the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger.)
(View from side)
Hanger
Wall
Screw
(2 pieces,
left and right)
Hanger
Wall