Parameter number 32:
Status_Water_Pump:
This parameter is used to display the status of the water pump.
Parameter number 33:
Status_Fan:
This parameter is used to display the status of the fan.
Parameter number 34:
Setpoinr_Cold_Water:
This parameter is used to change the setpoint of the ice water
alarm.
iom-cliv-eng
Parameter number 35:
Remote_Enabled:
The parameter allows enabling remote power-up in case an
external communication with another controller is required.
Parameter number 36:
Remote_OnOff:
This parameter allows the equipment to be switched on from a
remote communication signal.
54
Controller Use
www.comfort-flex.com