Controller Use
Número de parámetro 3:
Timer_Start_Fan:
The purpose of this parameter is to modify the fan start-up time
when the system is at start-up.
Parameter number 4:
Timer_Step_Compressor_On:
This parameter is intended to modify the start-up calculation
time for the temperature to which the system has to be set before
starting the compressor.
Parameter number 5:
Timer_Ton_Stage_1:
The purpose of this parameter is to modify the time at which the
compressor will turn on whether 1 or 2 stages are configured.
www.comfort-flex.com
Parameter number 6:
Timer_Stop_Compressor_By_Switch:
The purpose of this parameter is to modify the time it takes for the
power button to initiate the shutdown sequence after switching
off.
Parameter number 7:
Timer_Step_Compressor_Off:
With this parameter you can modify the stop time of the
compressor after the power button has been pressed off.
Parameter number 8:
Timer_Stop_Fan:
With this parameter you can modify the fan off time after the power
off button has been activated to completely stop the system.
49
iom-cliv-eng