Safety Warnings - Daikin Comfort Flex CLIV Series Installation, Operation And Maintenance Manual

This manual contains safety instructions that must be followed during installation and maintenance of the unit. Read this manual before
installing or operating this unit.
NOTE: Installation and maintenance should be performed only by qualified personnel who are familiar with local codes and regulations
and who have experience with this type of equipment.
LOCK OUT/LABEL all power sources before starting, pressurizing, depressurizing or shutting down the chiller.
Disconnect electrical power before servicing equipment. More than one disconnection may be required to deenergize the unit.
Failure to follow this warning to the letter can result in serious injury or death. Be sure to read and understand the installation,
operating and service instructions in this manual.
Electric shock danger. Improper handling of this equipment can cause personal injury or equipment damage. This equipment must
be properly grounded. Control panel connections and maintenance should be performed only by personnel knowledgeable in the
operation of the equipment being controlled. Disconnect electrical power before servicing equipment. Be sure to install a earth
leakage breaker. Failure to install a earth leakage breaker may result in electric shock or fire.
Static sensitive components. Static discharge during handling of the electronic circuit board can cause damage to components.
Use a static strap before performing any service work. Never unplug any cables, circuit board terminal blocks, or power plugs while
power is applied to the panel.
When moving refrigerant to/from the cooler using an auxiliary tank, a grounding strap should be used. An electrical charge builds
up when halo-carbon refrigerant travels in a rubber hose. A grounding strap should be used between the auxiliary refrigerant tank
and the cooler end sheet (ground to ground), which will safely carry the charge to ground. Failure to follow this procedure may result
in damage to sensitive electronic components.
If refrigerant leaks from the unit, there is a potential choking danger as the refrigerant will displace air in the immediate area. Be
sure to follow all applicable published industry-related standards and local, state, and federal statutes, regulations, and codes if
refrigerant is produced. Avoid exposing refrigerant to an open flame or other ignition source.
Polyolester oil, commonly referred to as POE oil, is a synthetic oil used in many refrigeration systems and may be present in this
Comfort Flex product. POE oil, if it ever comes in contact with PCV/CPVC, will coat the inside wall of the PVC/CPVC pipe and
cause environmental stress fractures. Although there is no PCV/CPCV pipe in this product, keep this in mind when selecting
piping materials for your application, as system failure and property damage could occur. Consult the pipe manufacturer's
recommendations to determine appropriate pipe applications.
Danger indicates a dangerous situation which, if not avoided, will result in death or serious injury.
Warning indicates a potentially dangerous situation which may result in property damage, personal injury or death if not avoided
Caution indicates a potentially dangerous situation which may result in minor injury or equipment damage if not avoided.
Notes: Indicate important details or clarifying statements for the information presented.
iom-cliv-eng
! !
DANGER
! !
WARNING
! !
CAUTION
! !
CAUTION
! !
WARNING
! !
WARNING
DANGER IDENTIFICATION INFORMATION
! !
DANGER
! !
WARNING
! !
CAUTION
4

Safety Warnings

www.comfort-flex.com