Controller Use
Parameter number 26:
Ton_Off_Fan:
This parameter is used to change the fan off time during the
compressor operation.
Parameter number 27:
Diff_Temp:
This parameter allows changing the temperature band at which
the system will be working.
Paramter number 28:
Water_Inyection_Value:
This parameter is used to display the temperature at which the
injection temperature sensor is registering.
www.comfort-flex.com
Parameter number 29:
Water_Return_Value:
This parameter is used to display the temperature at which the
Return temperature sensor is registering.
Parameter number 30:
Status_Compressor_1:
This parameter is used to display the status of compressor 1.
Parameter number 31:
Status_Compressor_2:
This parameter is used to display the status of compressor 2.
53
iom-cliv-eng